Setting Login Names And Passwords; Using File Memory - Omron CS1W-ETN11 Operation Manual

Setting Login Names and Passwords

7-2

Setting Login Names and Passwords

Setting Restrictions
Setting Method
7-3

Using File Memory

File Memory
Media Memory type
CS/CJ- Flash memory 8 MB
series
Memory
Cards
EM File RAM
Memory
The default FTP login name is "CONFIDENTIAL" and no password is required.
Login is completed by typing only "CONFIDENTIAL". A different login name
and a password can be set as required using the CPU Bus Unit Setup.
The following restrictions apply to login names and passwords.
• The login name and password must consist of alphanumeric characters,
hyphens, and/or underscores. They are not case sensitive.
• A login name consists of 12 characters.
• A password consists of 8 characters.
• Always set a password when setting a new login name. The login name
will not be valid unless a password is set for it.
• If a login name is not set or contains illegal characters, the default login
name, CONFIDENTIAL, must be used. No password is required and any
password that is set will be ignored.
A new login name and password can be set in the CPU Bus Unit Setup using
the Unit settings on the CX-Programmer.
Note The CPU Bus Unit Setup is not contained in I/O memory, but in a parameter
area. The Setup cannot be written using instructions or edited as I/O memory.
Settings can be made only with the CX-Programmer.
Refer to the CX-Programmer User's Manual for actual setting methods.
There are two media that can be used to store files in memory for CS/CJ-
series PCs:
• Memory Cards
• EM File Memory
Capacity
15 MB
30 MB
Max. capacity of EM Area
in CPU Unit
CPU Unit
Memory Card
EM File
Memory
Model
HMC-EF861 • Complete user program
• Specified portions of I/O Memory
HMC-EF171
• Parameter area data (e.g. PC Setup)
HMC-EF371
All EM Area banks
from specified bank in
I/O Memory (specified
in PC Setup)
Section 7-2
File
File
File
File
File data recognized by CPU Unit
163