Continuous Shooting And Exposure Bracketing - Canon DC22 Instruction Manual

~~~~~~~~~~~~~~~~~~~
•••• Still
I~age
Recording Options
-
»
a.
<
C),
:::J
(')
(1)
a.
'TI
s:::
:::J
(')
....
()"
:::J
en
• Default value
~
The camcorder records a still image in
three different exposures (dark, normal,
light in 1/2 EV steps), allowing you to
choose the shot you like the best.
CONTINUOUS SHOOTING/HIGH-SPEED
CONTINUOUS SHOOTING
3
Press
[PHOTO
I
fully and hold it
pressed down.
A series of still images will be
recorded as long as you hold the
button pressed.
AUTO EXPOSURE BRACKETING
3
Press
I
PHOTO
I
fu lIy.
Three still images in different
exposures will be recorded on the
memory card.
1
Press
I
DRIVE MODE
I
repeatedly to
cycle between the drive modes.
2
Press
I
PHOTO
I
halfway to activate
the autofocus.
(CD 13)
~~~01
~~~
DRIVE MODE button
ICAM.ERAII
0-1.]
POINTS TO CHECK
Mode switch:
P, seN
(except for the
[IIFIREWORKS] recording program).
• The still image cannot be recorded
simultaneously on the disc.
• The still image cannot be recorded on the
memory card while recording in widescreen or
while a digital effect is activated.
• The quality of the still image is slightly lower
than a still image of the same size recorded in
(CAMERJ~Di)
mode.
Continuous Shooting and Exposure
Bracketing
The still image is recorded on the memory Options
card while the screen continues to show
the video recording.
CD
NOTES
Maximum number of continuous shots at one time:
Frames per Second Maximum Number
Still Image Size of Continuous
Normal speed High speed Using the Flash
Shots
L
1632x1224 2.5 frames 3.8 frames 2.1 frames 10 images
M
1280x960 3.0 frames 5.0 frames 2.1 frames 10 images
S
640x480 3.0 frames 5.0 frames
2.1 frames 60 images
These figures are approximate and vary with the recording conditions and subjects.
The actual number of frames per second will be lower when
"~Odl
"
(camcorder shake warning) is
displayed on the screen.