Vel-6 A/V - Thinklogical VelocityDVI-33 Product Manual

A.4. VEL-6 A/V+
Velocitydvi
Digital Video Extender-6AV+ Installation Overview
Power Supply
(PWR-000022-R)
L1
L2 L3
Transmitter VEL-AV0M06-LCTX
STEP 1: Connect multi-mode fiber optic cables
(up to 1000 meters) between the Rx and Tx units.
L1: Data Tx to Rx & Video Primary
L2: Data Rx to Tx
L3: Video Secondary
1
Power Supply
(PWR-000022-R)
L3 L2
L1
Receiver VEL-AV0M06-LCRX
V e l o c i t y D V I E x t e n d e r P r o d u c t M a n u a l , R e v . A , J u n e ,
STEP 4: Connect the supplied AC Power
4
Adapter (PWR-000022-R) to the Tx and
plug it into a standard AC source.
STEP 2: Connect the supplied
2
AC Power Adapter (PWR-
000022-R) to the Rx and plug it
into a standard AC source.
5
STEP 5: Connect the video source (CPU) to
the Tx with a DVI-D M-M Cable. An optional
local display can also be connected using a
DVI-D M-M Cable. Connect the Audio IN
and OUT and Serial sources to the Tx with
standard copper cables
External RS-232 or RJ45 Device
3
Primary DDC Port
STEP 3: Connect the DVI to Display DDC
port to a video monitor (or projector or other
viewing device) with a DVI-D M-M Cable. A
second device can be installed at the DVI to
Display port using a similar cable. Connect
the audio and serial devices with standard
copper cables. Turn all the devices ON.
Page 45
2 0 1 3
CPU
RJ45 to
DB9
Local
Monitor
RJ45 to
DB9
Dual-Link
DVI OUT
Dual-Link
DVI OUT
DDC