Table of Contents
Advertisement
INSTALLATION
Configure Your Wireless Security Settings
Due to the limitation of the Wi-Fi WPA Test Plan, your AP's factory
default settings are not set at their maximum security level.
Adjustments are strongly recommended to ensure that you
communicate securely on your wireless network at maximum
strength. Failure to configure these settings properly could
compromise your network to wireless hackers.
Logging In
If at all possible, connect your computer with an Ethernet cable to the
AP and not wirelessly. If you log into the AP wirelessly for the first
time, someone could be snooping and see the changes you make to
passwords, thereby compromising your security from the very start.
After you have configured the security settings, then wirelessly
connecting to your AP is safe.
1
Once the AP is connected, open your web browser. Enter into the
URL field http://192.168.40.1 (the AP's default IP address) and
press Enter.
The login screen will appear.
SECTION 2, INSTALLATION
SECTION 2
2-19
Advertisement
Table of Contents
