Analog And Digital Input Configurations - Invertek Drives Optidrive ODE-2-11005-1H01 Series User Manual

7. Analog and Digital Input Configurations

7.1. Terminal Mode (P-12 = 0)
P-15 Digital input 1 (T2)
Open: Stop (disable)
0
Closed: Run (enable)
Open: Stop (disable)
1
Closed: Run (enable)
Open: Stop (disable)
2
Closed: Run (enable)
Open: Stop (disable)
3
Closed: Run (enable)
Open: Stop (disable)
4
Closed: Run (enable)
Open: Fwd Stop
5
Closed: Fwd Run
Open: Stop (disable)
6
Closed: Run (enable)
Open: Stop (disable)
7
Closed: Fwd Run (enable)
Open: Stop (disable)
8
Closed: Run (enable)
Open: Stop (disable)
9 Closed: Forward Run
(enable)
Normally Open (NO)
10
Momentary close to run
Normally Open (NO)
11
Momentary close to run
Open: Stop (disable)
12
Closed: Run (enable)
NOTE Negative Preset Speeds will be inverted if Run Reverse selected
Typical Applications
Terminal Mode P-12=0, P-15=0
+24 Volt
Run (Enable)
For / Rev
Analog / Preset
+ 10 Volts
Reference
0 Volts
Analog speed input with 1 preset speed and
fwd/rev switch
22
Optidrive ODE-2 User Guide Revision 3.20
Digital input 2 (T3) Digital input 3 (T4)
Open : Forward run Open : Analog speed ref
Closed : Reverse run Closed : Preset speed 1
Open: Analog speed ref Open: Preset speed 1
Closed : Preset speed 1/2 Closed : Preset speed 2
Digital Input 2 Digital Input 3
Open Open
Closed Open
Open Closed
Closed Closed
External trip input :
Open : Analog speed ref
Open: Trip,
Closed : Preset speed 1
Closed: Run
Open : Analog input 1
Analog input 2 reference Analog input 1 reference
Closed : Analog input 2
Open: Reverse Stop Open : Analog speed ref
Closed: Reverse Run Closed : Preset speed 1
External trip input :
Open : Forward
Open: Trip,
Closed : Reverse
Closed: Run
External trip input :
Open: Stop (disable)
Open: Trip,
Closed: Rev Run (enable)
Closed: Run
Digital Input 3
Open
Open : Forward
Closed
Closed : Reverse
Open
Closed
Digital Input 3
Open
Open: Stop (disable)
Closed: Reverse Run Closed
(enable)
Open
Closed
Normally Closed (NC) Open : Analog speed ref
Momentary open to stop Closed:Preset speed 1
Normally Closed (NC) Normally Open (NO)
Momentary open to stop Momentary close to rev
Open: Fast Stop (disable) Open : Analog speed ref
Closed: Run (enable) Closed : Preset speed 1
Terminal Mode P-12=0, P-15 = 1
Analog speed input with 2 preset speeds
www.invertekdrives.com
Analog input (T6)
Analog input 1 reference
Analog input 1 reference
Preset Speed
Preset Speed 1
Open: Preset speeds 1-4
Preset Speed 2
Closed : Max Speed(P-01)
Preset Speed 3
Preset Speed 4
Analog input 1 reference
Analog input 1 reference
Analog input 1 reference
Analog input 1 reference
Analog Input 1 Preset Speed
Open Preset Speed 1
Open Preset Speed 2
Closed Preset Speed 3
Closed Preset Speed 4
Analog Input 1 Preset Speed
Open Preset Speed 1
Open Preset Speed 2
Closed Preset Speed 3
Closed Preset Speed 4
Analog input 1 reference
Analog input 1 reference
Analog input 1 reference
+24 Volt
Run (Enable)
Analog / Preset
Preset1 / Preset2
+ 10 Volts
Reference
0 Volts
4 preset speeds and max speed select switch.
Comments
4 Preset speeds selectable.
Analog input used as digital
input Closed status: 8V < Vin
< 30V
Connect external motor
thermistor PTC type or
similar to digital input 3
Switches between analog
inputs 1 and 2
Closing digital inputs 1 and 2
together carries out a fast
stop (P-24)
Connect external motor
thermistor PTC type or
similar to digital input 3
Closing digital inputs 1 and 2
together carries out a fast
stop (P-24)
Closing digital inputs 1 and 2
together carries out a fast
stop (P-24)
Closing digital inputs 1 and 3
together carries out a fast
stop (P-24)
Terminal Mode P-12=0, P-15=2
+24 Volt
Run (Enable)
Preset Speeds 1 – 4
Select
Preset / Max
Effectively giving 5 preset speeds