Menu Functions; User Configurations; To Set The Pan To Inverting Or Non-Inverting; To Set The Tilt To Inverting Or Non-Inverting - Chauvet DMX-690 User Manual

Menu Functions

M O
ENU PTION

User Configurations

T O SET T H E P A N T O I N V ER T ING OR NON- IN VERT ING:
1) Press <MODE/ESC> until
scroll through the two options.
T O SET THE T I LT TO I N V ERTING OR NON- IN VERTING:
1) Press <MODE/ESC> until
2) Use the <UP> and <DOWN> buttons to scroll through the two options.
inverting;
T O R EV ER S E T H E D IS P L A Y:
1) Press <MODE/ESC> until
2) Use the <UP> and <DOWN> buttons to scroll through the two options.
T O SET THE F I X TU R E T O 16 - B IT OR 8-B IT M OD E:
1) Press <MODE/ESC> until
<DOWN> buttons to scroll through the two options.
bit.
Intimidator Spot 2.0 HTI Manual
D
ESCRIPTION
DMX: The fixture will be controlled by a DMX signal coming from a DMX controller.
The starting address must be selected, and can be set using the up and down
buttons.
Automatic – Master Unit: Sets the fixture to Master status for Master-Slave
operation and the built in programs will be triggered automatically. No data link is
required; all fixtures can be set to this mode for Stand-alone operation.
Sound Active – Master Unit: Sets the fixture to Master status for Master-Slave
operation and the built in programs will be triggered by the sound. No data link is
required; all fixtures can be set to this mode for Stand-alone operation.
Easy Controller – Master Unit: Sets the fixture to Master status for Master-Slave
operation and the built in programs will be triggered by the setting on the easy
controller.
Slave Unit: Sets the fixture to run in sync with the Master. You must set the first
fixture in the data link to "Master" otherwise nothing will happen.
is inverting.
is reversed.
15
is displayed. Use the <UP> and <DOWN> buttons to
is non-inverting;
is displayed.
or is displayed.
or is displayed. Use the <UP> and
is 16-bit;
is inverting.
is non-
is normal;
is 8-
2007-01-24/09:36