To Change The Pan Range; To Change The Tilt Range; Service Functions; To Reset The Fixture - Chauvet DMX-690 User Manual

TO CHANGE TH E PAN RANGE:
1) Press <MODE/ESC> until
2) Use the <UP> and <DOWN> buttons to scroll through the three options.
Note: These settings only apply if the fixture is in master/slave or stand-alone modes. These
settings will not affect a fixture operating in DMX mode.
TO CHANGE TH E TILT RA NGE :
1) Press <MODE/ESC> until
2) Use the <UP> and <DOWN> buttons to scroll through the three options.
Note: These settings only apply if the fixture is in master/slave or stand-alone modes. These
settings will not affect a fixture operating in DMX mode.

Service Functions

T O R ES E T T H E F I XTU R E:
1) Press the <MODE/ESC> button until
button. The fixture will now reset itself.
T O R ES T O R E A L L SET T IN G S T O T H E IR F A C T O R Y D E F A U L T S:
1) Press the <MODE/ESC> button until
button. The fixture will now load all factory default settings.
Intimidator Spot 2.0 HTI Manual
,
is 360°; is 180°
,
is 180°; is 90°
16
, or is displayed..
, or is displayed..
is displayed, and then press the <ENTER>
is displayed, and then press the <ENTER>
is 540°;
is 270°;
2007-01-24/09:36