Related Manuals for Chauvet DL-LEDW
Summary of Contents for Chauvet DL-LEDW
- Page 1 LED Durastrip™ DL-LEDW USER MANUAL CHAUVET, 3000 N 29 Ct, Hollywood, FL 33020 U.S.A (800) 762-1084 – (954) 929-1115 FAX (954) 929-5560 www.chauvetlighting.com 2006-08-28 17:47...
-
Page 2: Table Of Contents
UPPORT ©CHAUVET, 2006, All Rights Reserved Information and specifications in this User Manual are subject to change without notice. CHAUVET assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. Durastrip™ User Manual 2006-08-28... -
Page 3: Before You Begin
World Wide Web Durastrip™ User Manual Save the carton and all packing If you should require sending any items back to CHAUVET, call CHAUVET for a (RMA) Return Merchandise Authorization number. The factory will not allow any shipments without an RMA. -
Page 4: Important Safety Information
If you have any questions about how to operate the fixture safely, please contact CHAUVET. P r o t e c t i o n a g a i n s t E l e c t r i c S h o c k •... -
Page 5: Introduction
One such item to draw special attention to is the PVC glue. CHAUVET does not provide PVC glue with the accessories enclosed. This item is continuously illustrated in all pictures and is an integral component for maintaining water-tight connections. -
Page 6: Component Overview
Component Overview Items Included with your purchase: Items NOT included with your purchase but recommended during installation: Durastrip™ User Manual Power Cord with 1.6A Adapter Splice Connector & Heat Shrink Tube Cutter Scissor Diagonal Cutter Introduction End Caps Mounting Clips Channel Track Double Sided Tape... -
Page 7: Setup
3. Setup AC Power Warning! Verify that the power requirement label on your unit matches the line voltage applied. All fixtures must be connected to circuits with a suitable Earth Ground. • To determine the power requirements for a particular fixture, see the label affixed to the back plate of the fixture or refer to the fixture’s specifications chart. -
Page 8: Installation
4. Connect pieces together. Cutting Marks (Cutting Unit) Item No. DL-LEDW Maximum Lengths and Power Consumption Do not exceed the 240 feet maximum length and only cut on the provided marks every 3 feet. Cutting... -
Page 9: Installation
Operating Instructions Installation Cut only on the indicated mark. A mark should exist every 3 feet. Before making a splice connection, bend the tip of a newly cut strip in opposing directions several times. Cut any excess copper wires that protrude from the end with a diagonal cutter. -
Page 10: Options
Operating Instructions Options Use mounting clips for flat surface mounting. Frame objects, letters any many designs using metal wires and tie wraps. Use double-sided tape to adhere to indoor dry surfaces. Durastrip™ User Manual 2006-08-28 17:47... -
Page 11: Appendix
Package must be clearly labeled with a Return Merchandise Authorization Number (RA #). Products returned without an RA # will be refused. Call CHAUVET and request RA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.