Grandstream Networks GXW-410x Quick Installation Manual page 4

ACCESSING THE WEB CONFIGURATION PAGES
1. Connect the Power to the GXW410x unit.
2. Connect an Ethernet cable between the LAN port on GXW410x to your PC.
3. Assign a dummy IP with the same subnet as the GXW410x IP Address, which is
192.168.0.160 by default. For example, set an IP address like 192.168.0.x for your PC.
4. Launch web browser and type
connects you to the built-in web server of GXW410x.
Change the GXW setting to use DHCP (or PPPoE) or another static IP address according to the
local network environment. If unable to access the Web GUI at the dummy Static IP
192.168.0.160, the unit may be set to the default DHCP setting. Connect the WAN port to the
local network. To locate the GXW410x's IP address, run a network trace (filtered by the MAC
address) or download the 'IP Sniffer' tool: http://www.grandstream.com/y-downloads.htm.
CONFIGURATION
There are 2 methods to configure GXW410x to work with an IP PBX:
Method
Method 1
Method 2
METHOD 1 Configuration:
1. Enter a SIP Server IP Address (or FQDN ex. sip.mysipserver.com) in the SIP Server field
under Profile 1 webpage.
2. Next, go to the Channels webpage and enter up to 8 accounts/extensions and their
Authentication ID and Authentication Passwords, and select the corresponding Profile.
Channels
1
2
3
4
5
6
7
8
www.grandstream.com
http://192.168.0.160
Description
Configure GXW410x with SIP Accounts in IP-PBX, this will
enable you to put GXW410x behind a NAT/Firewall. (Used for
one-stage and two-stage dialing)
Configure GXW410x to function as a PEER gateway. (No SIP
accounts are needed; only used for one-stage dialing)
SIP User Authentication
ID
101
102
103
104
105
106
107
108
info@grandstream.com
at address of web browser. This
Authentication
ID Password
101 ***
102 ***
103 ***
104 ***
105 ***
106 ***
107 ***
108 ***
Profile
ID
Profile1
Profile1
Profile1
Profile1
Profile1
Profile1
Profile1
Profile1
GXW-410x Quick Install Guide, p. 4