Counter Units And Positioning Unit; System Units - Omron SmartSlice GRT1-OD4G-1 Operation Manual

Available Units
1-2-4

Counter Units and Positioning Unit

1-2-5

System Units

8
Type
Counter • A and B counter inputs
Units
• One input settable to Z counter
input or digital input
• 1 digital output (NPN)
• A and B counter inputs
• One input settable to Z counter
input or digital input
• 1 digital output (PNP)
Positioning • A, B, and Z counter inputs
Unit
• 1 digital input
• 2 digital outputs (PNP)
Type
Right Turnback Unit ---
Left Turnback Unit ---
I/O Power Feed Units ---
---
---
---
I/O Power Connection ---
Units
---
End Unit ---
I/O Model number
GRT1-CT1
GRT1-CT1-1
GRT1-CP1-L
I/O points Model number
GRT1-TBR
GRT1-TBL
GRT1-PD2
GRT1-PD2G
GRT1-PD8
GRT1-PD8-1
GRT1-PC8
GRT1-PC8-1
GRT1-END
Section 1-2
Description
1 counter
Max. frequency:
60 kHz (depend-
ing on counter
input mode)
1 counter
Max. frequency:
100 kHz (depend-
ing on interface
and counter input
mode)
Description
Mounts to the right side of
the last Unit to add a new
block.
Mounts to the left side of
the new block. Power is
supplied from the Left
Turnback Unit.
Feeds I/O power within the
Slice I/O Terminal.
2 voltage terminals and
2 ground terminals
Feeds I/O power within the
Slice I/O Terminal.
2 voltage terminals and
2 ground terminals
Overcurrent protection
Feeds I/O power within the
Slice I/O Terminal.
8 voltage terminals and
4 ground terminals
Feeds I/O power within the
Slice I/O Terminal.
4 voltage terminals and
8 ground terminals
Provides extra voltage and
ground terminals.
8 voltage terminals and
4 ground terminals
Provides extra voltage and
ground terminals.
4 voltage terminals and
8 ground terminals
An End Unit must be
mounted to the end of the
Slice I/O Terminal.