Basic Operation - ATEN IOGear GWHDMS52 User Manual

Basic Operation

1. After the power adapter is plugged into the electrical outlet, the device will turn ON
automatically.
2. If the receiver is in Standby mode (POWER LED on the receiver is lit in red), press the
POWER button ON to the receiver and then transmitter and receiver will establish link
automatically. You may also turn POWER ON to the receiver with the remote control.
Please note that the HDMI out on the transmitter will always be ON even when the
transmitter is in standby mode.
3. Power ON all connected displays (ie TV, monitor, projector) and source devices (ie cable
box, Blu-ray player, game console, computer).
16