Step 2: Setup The Receiver - ATEN IOGear GWHDMS52 User Manual

Step 2: Setup the Receiver

HDTV Connection with receiver:
*
1. Connect the supplied mini USB power
adapter to the DC IN jack of the receiver
and a wall socket. The POWER LED
indicator lights up in green when the
receiver is connected to power.
2. Connect either a USB based Keyboard
or Mouse to the USB port on the back of
the receiver.
*(IOGEAR Wireless AV Multimedia
Keyboards with trackball make a perfect
companion: GKM561R, GKM681R,
GKM581R and GKM571R)
HD Projector or HD Flat Panel TV
3. Connect an HDMI cable to the HDMI OUT
jack of the receiver and to the HDMI-IN
on the HDTV (or an HD projector).
Press the Source button on your receiver
or the left and right arrows button on the
remote to select the appropriate "HDMI"
video input.
4. Plug in the IR sensor extender cable
provided. Please refer to page 14, Step 3
of the Hardware Installation section.
13