Audio Bit Rate Support - ATEN IOGear GWHDMS52 User Manual

If the Source/Status LED continues to blink green (slower than "no signal" mode); or
OSD display shows
support 3D video format and try to switch the 3D video format to one of the 3D timings listed
below.
Mandatory CEA 3D Video Format Timings
1280x720p @ 50Hz Top-and-Bottom
1280x720p @ 50Hz Frame packing
1280x720p @ 59.94 / 60Hz Top-and-Bottom
1280x720p @ 59.94 / 60Hz Frame packing
1920x1080i @ 50Hz Side-by-Side (Half)
1920x1080i @ 59.94 / 60Hz Side-by-Side (Half)
1920x1080p @ 23.98 / 24Hz Top-and-Bottom
1920x1080p @ 23.98 / 24Hz Frame packing

Audio Bit Rate Support

• Digital Audio from HDMI inputs: Up to 6Mbit/s bit-rate support.
• Support AC3 and DTS.
• 2-channel PCM: 16~24 bits audio sample with 32~96KHz sampling rate as below:
2channel PCM
16 bits
24 bits
, please check that both TVs connected to the transmitter and receiver
32KHz
YES
YES
44.1KHz 48KHz
YES YES
YES YES
27
Support
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
96KHz
YES
YES