Supported Resolution - ATEN IOGear GWHDMS52 User Manual

Supported Resolution

If the SOURCE LED continues to blink in green (slower than "no signal" mode);
OSD display:
that the video frame rate from your A/V source device is not supported. Ensure that the
consumer timing of your HDMI device is compliant with the standard listed below:
2D Video Format Timings
640x480p @ 59.94 / 60Hz
720x480p @ 59.94Hz
720x480p @ 60Hz
720x576p @ 50Hz
1280x720p @ 50Hz
1280x720p @ 59.94 / 60Hz
1920x1080i @ 50Hz
1920x1080i @ 59.94 / 60Hz
1920x1080p @ 50Hz
1920x1080p @ 59.94 / 60Hz
1920x1080p @ 23.98 / 24Hz
1920x1080p @ 25Hz
1920x1080p @ 29.97 / 30Hz
640x480 @ 59.94 / 72.809Hz
800x600 @ 60.317 / 72.188Hz
1024x768 @ 60 / 70.069Hz
1280x768 @ 60 Hz
1280x1024 @ 60 Hz
, and there is no video displayed or the video quality suffers, it indicates
Primary CEA Video Timing
Secondary CEA Video Timing
VESA Timing (DVI only)
Resolution
480p
576p
720p
1080i
1080p / 60
1080p / 24
VGA
SVGA
XGA
WXGA
SXGA
26
Support
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES