Quick Reference Table - Supermicro SuperServer E300-9A-8C User Manual

SuperServer E300-9A-4C/E300-9A-8C User's Manual

Quick Reference Table

Jumper Description
JBR1 BIOS Recovery
JBT1 CMOS Clear
JI2C1/JI2C2 SMB to PCI-E Slots Enable/Disable
JPG1 VGA Enable/Disable
JPL1 LAN Enable/Disable
JPME2 ME Manufacturing Mode
JWD1 Watch Dog
LED Description
LED1 Onboard Power LED
LEDM1 BMC Heartbeat LED
UIDLED1 UID LED
Connector Description
BT1 Onboard Battery
COM1 COM Header
FAN1 - FAN3, FANA System/CPU Fan Headers (FAN1: CPU Fan)
IPMI LAN Dedicated IPMI LAN Port
I-SATA0 - I-SATA3 Intel SATA 3.0 Ports (I-SATA0 supports SuperDOM)
JD1 Speaker Header
JF1 Front Control Panel Header
JGP1 General Purpose I/O Header
JL1 Chassis Intrusion Header
JMD1 M.2 PCI-E 3.0 x2 / I-SATA Slot
4-pin Power Connector for HDD use (To provide power from the motherboard to onboard HDD
JPH1
devices)
JPI C1 Power Supply SMBbus I
2
4-pin DC Power Connector (To provide alternative power for special enclosure when the 24-pin
JPV1
ATX power is not in use.)
JPW1 24-pin ATX Power Connector
JRT3 Thermal Diode 1 Header
JRT4 Thermal Diode 2 Header
JSAS1 I-SATA Ports 4-7
JSAS2 I-SATA Ports 8-11 (Not available on A2SDi-4C-HLN4F)
JSD1 SATA DOM Power Connector
JSMB1 SMBus Header
JTGLED1 LAN3/LAN4 Front Activity LED
JTPM1 Trusted Platform Module/Port 80 Connector
LAN1 - LAN4 Gigabit Ethernet (RJ45) Ports
Status
Solid Green: Power On
Blinking Green: BMC Normal
Solid Blue: Unit Identified
C Header
2
12
Default Setting
Pins 1-2 (Normal)
Open (Normal)
Pins 2-3 (Disable)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)