Safety Devices; Safety Labels And Markings On This Equipment; On The Flap Cover - Elektron MULTISPOT MI-100-3 Operating Manual

2.6 Safety devices

WARNING! Danger! Due to insufficient protection against residual current!
Connection to electrical socket: the device may only be plugged into a socket with a residual current
device and an operable earthing device.
Fig. 1:
Power switch on the backside
WARNING ! Danger! Equipment may still be under voltage.
After switching off the power switch on the backside of the equipment, there may still be
components inside that are still under voltage. Therefore:
In order to disconnect this equipment from the power supply, switch off using the power
−
switch. Earth components, short circuit and check for residual electricity.
Safety labels and markings on this
2.7
2.7.1

On the flap cover

Fig. 2: Warning sign
"Electromagnetic fields"
on the flap cover
DANGER ! Electromagnetic fields pose a mortal danger to persons with pacemakers.
Electromagnetic fields affect the functionality of pacemakers and other magnetisable implants.
Electromagnetic fields can irritate human sense organs, nerve and muscle cells. Therefore:
Persons with pacemakers or other magnetisable implants must not approach the working
−
area.
Be sure to put up suitable warning signs.
−
Be sure to put warning signs on access ways and doors leading to the work area.
−
Do not guide welding cables along people's heads or spines. Keep a distance of at least
−
1 cm.
Power switch
Turning the power switch to position "0" will disconnect the power
supply immediately.
Welding generates electromagnetic fields. Electromagnetic fields pose a potentially
fatal hazard to people with pacemakers or other magnetisable implants.
Electromagnetic fields also affect magnetisable objects, like e.g. watches, smart
cards etc.
Resistance Welder MULTISPOT MI-100-3
equipment
Meaning
Health and safety
13