Table of Contents
Advertisement
Motor protection switch
The motor is protected from overload by a motor protection switch, which
automatically cuts out the motor in the event of overload. However should the
switch trip frequently, the cause of the malfunction should be located and recti-
fied (see page 6).
Replacements and inspection work should only be performed
by qualified persons when the machine is disconnected
from the power supply, i.e. pull out the plug from the
electrical socket.
Setting up
Location
Neither set up and operate the machine in rooms where there is
a risk of fire or explosion nor put it into puddles. Do not use the
machine under water.
CAUTION !
Never use liquid containing solvents such as paint thinners, petrol,
oil or similar liquid matter. Pay attention to the instructions
of the manufacturers of the cleaning agents. The seals
in the machine are not resistant to solvents. The spray of solvents
is inflammable, explosive and poisonous.
CAUTION !
When running your high pressure cleaner with hot water of
60° C raised temperatures occur.
Do not touch the machine without safety gloves!
Description
5
Advertisement
Table of Contents
