Table of Contents
Advertisement
The nozzle is blocked!
No water but the gauge shows full pressure !
Rinse the hose
through
first.
remove the lance and clean
the nozzle.
Insert pointed object
into the hole and pull
the cap back!
Check visually whether the
nozzle is clean.
- Do it yourself!
You should now have
a powerful
stream of
water,
Straighten a paper
clip and clean the
nozzle.
but if you
only get a few
drops from
the lance
Using the flat spray lance you
only have to clean the front
nozzle.
Now it works as well
as before.
19
Advertisement
Table of Contents
