Advertisement
Introducing the HDMI Extender
The HDMI Extender over 2 CAT5e with IR boosts your
audio/video transmission distance up to 60m (200ft) in
HDTV 1080i format. With two cost effective CAT5e/6
cables, users can readily extend an HDMI source such as
a DVD player, Blu-ray Disc player, game console, PC,
and any other TMDS compliant devices to a remote
HDMI/DVI TV or LCD monitor. This cost effective
solution provides flexibility for HDMI enabled devices
to transmit high quality audio/video to greater distances
at minimal cost.
Features and Benefits
HDMI 1.3a and HDCP compliant
•
Extends audio/video transmission from an HDMI
•
source to an HDMI display over two economical
CAT5e/6 cables
Controls source devices from the remote side
•
instantly
Embedded IR control path
•
Minimize cable skew with the adjustable 8-level
•
equalization knob
Supports distances up to 60m/200ft @ 720p/1080i
•
or 40m/130ft @ 1080p
04-0508B
HDMI Extender over 2
CAT5e with IR
Quick Installation Guide
1
Advertisement
Table of Contents
Related Manuals for SIIG CE-HM0052-S1
Summary of Contents for SIIG CE-HM0052-S1
- Page 1 HDMI Extender over 2 CAT5e with IR Quick Installation Guide Introducing the HDMI Extender The HDMI Extender over 2 CAT5e with IR boosts your audio/video transmission distance up to 60m (200ft) in HDTV 1080i format. With two cost effective CAT5e/6 cables, users can readily extend an HDMI source such as a DVD player, Blu-ray Disc player, game console, PC, and any other TMDS compliant devices to a remote...
- Page 2 Package Contents HDMI transmitter (TX) • HDMI receiver (RX) • • 1x Power adapter (5V, 4A) IR transmitter extension cable (90cm/3ft) • IR receiver extension cable (90cm/3ft) • Quick installation guide • Layout Figure 1: Transmitter (front & back) • HDMI In: connect to a HDMI source with an HDMI M-M cable (not included) here •...
- Page 3 Figure 2: Receiver (front & back) • HDMI Out: connect an HDMI display with an HDMI M-M cable (not included) here • EQ: adjusts the equilization of the received signal from 0 (strongest) to 7 (weakest). It is recommended to switch from 0 to 7 to find the optimal visual experience •...
- Page 4 Figure 3: IR Transmitter Figure 4: IR Receiver Hardware Installation Connect your HDMI source to the transmitter. Connect the IR transmitter cable to the transmitting unit and point the emitter directly to the IR of the HDMI source. Connect your HDMI display to the receiving unit. Connect your CAT5e cables between the transmitting and receiving units.
- Page 5 Notes When transmitting non-HDCP compliant audio/ video, you can use just one CAT5e/6 cable connected through TMDS. All transmission distances in this manual are measured using CAT5e cable(s). Actual transmission length and quality of the received display depends on the quality of your CAT5e/6 cables. To reduce EMI interference over long transmission distances, use shielded CAT5e/6 cables.
- Page 6 Blank Page...
- Page 7 Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. Step 2: After obtaining an RMA number, ship the product.
- Page 8 Fremont, CA 94538-3152, USA Phone: 510-657-8688 HDMI Extender over 2 CAT5e with IR is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Other names used in this publication are for identification only and may be trademarks of their respective companies.
Need help?
Do you have a question about the CE-HM0052-S1 and is the answer not in the manual?
Questions and answers