Table of Contents
Advertisement
Quick Links
Introduction
The HDMI Over Gigabit IP Extender Kit with IR extends
HDMI signal over one Cat5/6 cable up to 330ft.
Features and Benefits
•
Extend HDMI signals up to 100m over Cat5e/6
cabling
•
Supports video high resolution Full HD 1080p, 1920
x 1080
•
IR (Infrared Remote) pass-through enabled
•
High Definition Audio (HD) Surround Sound
•
Metal housing with mounting mechanism
Package Contents
CE-H22811-S1
04-0958A
HDMI Over Gigabit IP
Extender Kit with IR
Installation Guide
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SIIG CE-H22811-S1
Summary of Contents for SIIG CE-H22811-S1
-
Page 1: Installation Guide
Extend HDMI signals up to 100m over Cat5e/6 cabling • Supports video high resolution Full HD 1080p, 1920 x 1080 • IR (Infrared Remote) pass-through enabled • High Definition Audio (HD) Surround Sound • Metal housing with mounting mechanism Package Contents CE-H22811-S1 04-0958A... - Page 2 CE-H22911-S1 Layout Transmitter Unit (Tx) Figure 1: Transmitter side panel • DC 5V: DC 5V power jack. Plug the included power adapter here • PWR: LED indicator for power status. On/Off when the Transmitter is powered on/off • LINK: LED indicator for link status. On when the connection between the Transmitter and Receiver is established...
- Page 3 • HDMI IN: HDMI signal input port. Connect this port to your HDMI source device by using an HDMI cable (not included) • LINE: Signal output port, connected with Receiver's LINE port by using a CAT X cable (not included) •...
-
Page 4: Hardware Installation
IR Extension Cables Figure 3a: IR blaster cable Figure 3b: IR receiver cable To control the source device from Receiver's end: Plug the IR blaster cable to the Transmitter's IR connector, then plug the IR receiver cable to the Receiver's IR connector. Point your source device's remote control to the IR receiver's eye, the command will be sent to Transmitter end, and the connected source device... - Page 5 For additional extending of the HDMI signal, connect another Receiver/Repeater to the LINE port of the first Receiver/Repeater. Skip this step if extension is not needed. Plug the included power adapters into the DC 5V power jack of the Transmitter and Receiver separately. Power on the connected source device and display,...
- Page 6 Gigabit Ethernet Switch Connection HDMI CAT. X cable Display HDMI cable Gigabit switch HDMI Display HDMI Display HDMI source Figure 5: Used with Gigabit Ethernet switch • Connect with the Gigabit Ethernet switch as shown in the diagram above for multiple device connections •...
- Page 7 (2) years from the date of purchase of the product. SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship.
- Page 8 Fremont, CA 94538-3152, USA Phone: 510-657-8688 HDMI Over Gigabit IP Extender Kit with IR is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the CE-H22811-S1 and is the answer not in the manual?
Questions and answers