Subscribe to Our Youtube Channel
Related Manuals for SIIG CE-H23411-S1
Summary of Contents for SIIG CE-H23411-S1
- Page 1 4K HDR HDMI 2.0 & USB 2.0 Extender Over HDBaseT with RS-232 & IR User Reference Guide P/N: CE-H23411-S1 04-1123A...
-
Page 2: Features And Benefits
Introduction The 4K HDR HDMI 2.0 & USB 2.0 Extender Over HDBaseT with RS-232 & IR extends HDMI transmission distance up to 330ft (100m) at 1080p or 230ft (70m) at 4K over an economical CAT5e/6 cable. Plus, bi-directional extension of IR, RS232 and USB 2.0 for advanced and interactive applications. -
Page 3: Specifications
Specifications Compliance HDMI 2.0a / HDCP 2.2 Resolution HDR 4Kx2K @60Hz (4:2:0 10bit) / 4Kx2K@60Hz (4:4:4 8bit) Audio LPCM, DTS-HD and Dolby True HD (7.1CH) HDR 4Kx2K @60Hz: Up to 70m Transmission Distance 1080p @60Hz: Up to 100m IR Signal Frequency 20KHz to 60KHz 1x 19-pin HDMI Type-A, Female 1x 3.5mm audio jack (Stereo) - Page 4 Layout Note: With PoC technology, only one power adapter is needed to power both the Transmitter and Receiver. IR Out Stereo Input HDMI In IR In Figure 1: Transmitter (TX) - front HDMI In: Connect your HDMI source here with ...
- Page 5 USB Type-A: Connect to USB Device Micro USB: Connect to USB Host Phoenix connector (RS232): Connect to the included terminal block and RS-232 connector (not included), then connect to a serial port device or computer for data transferring Dip Switch: Refer to below table for configuration ...
- Page 6 HDMI Out: Connect your HDMI display with an HDMI cable (cable not included) Stereo Output: External analog audio output from transmitter over HDBaseT S/PDIF Output: Local ARC output IR Out: Infrared 3.5mm socket. Plug IR Blaster extension cable here.
- Page 7 RS-232 Wire Connection Insert the included terminal block to Phoenix connector. Figure 5 Connect the wires (not included) to the included Terminal Block and the RS232 connector as below diagram. - Via pin to pin (Parallel) connector or cable: 2 RXD 3 TXD 5 GND - Via null connector or cable:...
-
Page 8: Out Port
IR Extenders (20~60kHz IR devices supported) Figure 7: IR Blaster cable Figure 8: IR Receiver cable (Connect to IR Out) (Connect to IR In) IR Blaster cable: Plug into the Transmitter's or Receiver's IR Out to emit IR signals IR Receiver cable: Plug into the Receiver's or ... -
Page 9: Hardware Installation
Hardware Installation Note: To achieve optimal performance, a shielded 100% copper wire CAT6/7 cable is recommended. Power off all devices including your HDMI source and display. Connect your HDMI source to the Transmitter's HDMI IN connector with an HDMI cable (not included). - Page 10 Application Extends HDMI signals such as game consoles, DVD players or computers up to 100m (330ft). Equipped with bi-directional IR pass-through path, RS-232 serial port control and USB 2.0, offers the convenient path for interactive applications, such as touch panels. Makes it a great solution for digital signage with long distance A/V transmission.
-
Page 11: Technical Support And Warranty
This warranty is not transferable and is available only to the original purchaser of the product. SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship. - Page 12 Phone: 510-657-8688 4K HDR HDMI 2.0 & USB 2.0 Extender Over HDBaseT with RS-232 & IR is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the CE-H23411-S1 and is the answer not in the manual?
Questions and answers