Advertisement
Introducing the HDMI Extender
The HDMI Extender over 1 CAT5e extends HDMI signals
via 1 CAT5e/6 cable to virtually any HDMI enabled
display. This cost effective solution provides flexibility
for HDMI enabled devices to transmit high quality audio/
video to greater distances at minimal cost.
Features and Benefits
•
Extends audio/video transmission from an HDMI
source to an HDMI display over one economical
CAT5e/6 cable
•
Minimize cable skew with the adjustable 8-level
equalization knob
•
Compatible with DVI monitors
•
HDMI 1.2a and HDCP compatible
•
Bandwidth: 1.65 Gps
•
Supports distances up to 60m/200 ft @ 720P/1080i
or 40m/130 ft @ 1080p
Package Contents
•
HDMI transmitter (TX)
•
HDMI receiver (RX)
•
2x Power adapter (5V, 4A)
•
Quick Installation Guide
04-0502A
HDMI Extender Over 1 CAT5e
Quick Installation Guide
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SIIG CE-H20011-S1
Summary of Contents for SIIG CE-H20011-S1
- Page 1 HDMI Extender Over 1 CAT5e Quick Installation Guide Introducing the HDMI Extender The HDMI Extender over 1 CAT5e extends HDMI signals via 1 CAT5e/6 cable to virtually any HDMI enabled display. This cost effective solution provides flexibility for HDMI enabled devices to transmit high quality audio/ video to greater distances at minimal cost.
- Page 2 Layout Figure 1: Transmitter (front and back) • HDMI-IN: Connect to a HDMI source with a HDMI M-M cable (not included) here • RJ45-OUT: Plug in a CAT5e/6 cable, to be linked to the RJ-45 connector of the HDMI receiver •...
- Page 3 • HDMI-OUT: connect to a HDMI display with a HDMI M-M cable (not included) here • EQ: adjusts the equilization of the received signal from 0 (strongest) to 7 (weakest). It is recommended to try each setting, from 0 to 7 to find the optimal visual experience •...
-
Page 4: Hardware Installation
Hardware Installation Connect your HDMI source to the transmitting unit. Connect your HDMI display to the receiving unit. Connect your CAT5e/6 cable between the transmitting and receiving units. Make sure the cable is securely connected and not loose. Plug in the power adapter to each unit, then plug the power adapters into a reliable power source. - Page 5 Blank Page...
- Page 6 Blank Page...
- Page 7 Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. Step 2: After obtaining an RMA number, ship the product.
- Page 8 Fremont, CA 94538-3152, USA Ph: 510-657-8688 HDMI Extender over 1 CAT5e is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Other names used in this publication are for identification only and may be trademarks of their respective companies.
Need help?
Do you have a question about the CE-H20011-S1 and is the answer not in the manual?
Questions and answers