Table of Contents
Advertisement
Quick Links
HDMI 4K Extender over single
cat5e/6 Cable with IR - 60m
Introduction
The HDMI 4K Extender over single cat5e/6 Cable with IR -
60m extends your HDMI A/V signals to a remote display
up to 197ft (60m) away through a single Cat5e/6 cable.
Key Features and Benefits
• Delivers crystal clear picture quality up to 30m at
4Kx2K @60Hz, up to 60m at 4Kx2K @30Hz
• Plug-n-play. IR remote control feature allows to
remotely control the HDMI source device from the
remote display side
• Unique and low profile design easily adapts into the
environment, mounting brackets included for
different installation requirements
• High quality metal housing with ventilation panels
better promote heat dissipation and system stability
during long periods of operation
• Built-in power indicator provides easy power status
monitoring
04-1086A
User Reference Guide
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SIIG CE-H22N15-S1
Summary of Contents for SIIG CE-H22N15-S1
- Page 1 HDMI 4K Extender over single cat5e/6 Cable with IR - 60m User Reference Guide Introduction The HDMI 4K Extender over single cat5e/6 Cable with IR - 60m extends your HDMI A/V signals to a remote display up to 197ft (60m) away through a single Cat5e/6 cable. Key Features and Benefits •...
-
Page 2: Package Contents
Package Contents • HDMI 4K Extender over single cat5e/6 Cable with IR - • Power adapters (x2) • IR Blaster extension cable & IR Receiver extension cable • Mounting ears & screw kit • User Reference Guide Specifications Version Compatible with HDMI 2.0 and HDCP 2.2 Resolution 2160p / 1080p / 1080i / 720p / 480p Audio... - Page 3 Layout Power Jack HDMI In IR Out Figure 1: Transmitter (TX) - HDMI Device Input • Power Jack: Connect the included 5V/1A DC power adapter here • HDMI In: Connect your HDMI source here with an HDMI cable (cable not included) •...
- Page 4 RJ45 Power LED Reset Figure 2: Transmitter (TX) - RJ45 Output • Reset: Press to reset if HDMI Extender doesn't work properly • RJ45: Link to the Receiver's RJ45 via a Cat5e/6 cable • Power LED: On when the Transmitter is powered...
- Page 5 Reset RJ45 Power LED Figure 3: Receiver (RX) - RJ45 Input • Reset: Press to reset if HDMI Extender doesn't work properly • RJ45: Link to the Transmitter's RJ45 via a Cat5e/6 cable • Power LED: On when the Receiver is powered...
- Page 6 Power Jack HDMI Out IR In Figure 4: Receiver (RX) - HDMI Display Output • Power Jack: Connect the included 5V/1A DC power adapter here • HDMI Out: Connect to your HDMI display here with an HDMI cable (cable not included) •...
- Page 7 IR Extenders (20~60kHz IR devices supported) Figure 5: IR Blaster cable Figure 6: IR Receiver cable (Connect to Transmitter) (Connect to Receiver) • IR Blaster cable: Plug into the Transmitter's IR 3.5mm socket to emit IR signals • IR Receiver cable: Plug into the Receiver's IR 3.5mm socket to receive IR signals from a remote control (for the HDMI device connected to the Transmitter) Important Note: Incorrect placement of IR Receiver...
-
Page 8: Hardware Installation
Hardware Installation Note: To achieve optimal performance, a CAT6 cable is recommended. 1. Power off all devices including your HDMI source and display. 2. Connect your HDMI source to the Transmitter's HDMI IN connector with an HDMI cable (not included). 3. - Page 9 Application Extends HDMI signals such as game consoles, DVD players or computers up to 197ft (60m) and supports high resolutions up to 4Kx2K. Transmitter Receiver IR OUT IR IN * When using the remote control, please make sure its distance to the IR Receiver extension cable is within 5 meters (16.4 ft) and without obstructions.
- Page 10 FAQ & Solutions Q: There is no picture on the TV: A: 1) Check whether the correct TV input is selected. 2) Make sure the HDMI cables support 4K x2K when the output signal from the source device is 4Kx2K resolution. 3) Make sure the Network cable (CAT5e/6) is firmly connected between TX and RX.
-
Page 11: Technical Support And Warranty
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued. -
Page 12: Product Name
Fremont, CA 94538-3152, USA Phone: 510-657-8688 HDMI 4K Extender over single cat5e/6 Cable with IR - 60m is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the CE-H22N15-S1 and is the answer not in the manual?
Questions and answers