Related Manuals for SIIG CE-H23811-S1
Summary of Contents for SIIG CE-H23811-S1
- Page 1 Dual Antenna Wireless Multi-Channel Expandable HDMI Extender Installation Guide 04-1125A...
-
Page 2: Features And Benefits
Introduction The Dual Antenna Wireless Multi-Channel Expandable HDMI Extender wirelessly transmits HDMI signals with stereo audio up to 165ft. Features and Benefits • Supports up to 2 transmitter units (part # CE- H23811-S1 sold separately) and 2 receiver units (part # CE-H23911-S1 sold separately). Allows you to choose and broadcast any of the 2 sources to any of the 2 displays simultaneously •... -
Page 3: Package Contents
Package Contents • Dual Antenna Wireless Multi-Channel Expandable HDMI Extender • IR blaster extension cable • IR receiver extension cable • Power adapters (x2) • Remote control (with one battery) • Installation Guide Specifications Wireless Technology 5 GHz Signal Type HDMI HDMI Version HDMI 1.3 compatible... -
Page 4: Product Layout
Product Layout Switch button Reset button Input channel indicator IR window Figure 1: Transmitter (TX) - front side • Input channel indicator: Indicates the input channel selected. There are 10 channels (0-9) • Switch button: Press to select the channel •... - Page 5 • HDMI out: Connects to a local HDMI diaplay • IR out: Plug the IR Blaster extension cable here Switch button Reset button Output channel indicator IR window Figure 3: Receiver (RX) - front side • Output channel indicator: Indicates the channel selected.
-
Page 6: Transmitter Unit
• Data transmission indicator: - Blinks slowly when searching for wireless signal - Blinks fast when wireless signal is linked • HDMI Out: Connects to your HDMI display with a HDMI cable (cable not included) • IR in: Plug the IR Receiver extension cable here •... -
Page 7: Hardware Installation
Hardware Installation Power off all devices including your HDMI source and display. Attach the included antennas to the TX and RX. Connect your HDMI source to the Transmitter's HDMI IN connector. Connect your HDMI display to the transmitter's HDMI OUT. This connection is optional and needed only when local moniting of the video signal is desired. - Page 8 Application Extends HDMI A/V signals to a remote display up to 165ft away and supports high resolutions up to 1080p Full HD. Note: The transmission distance will vary depending on building layout, electronic interference, other environmental conditions, and may be much less than the maximum.
- Page 9 Figure 9 Matrix (2 TX's to 2 RX's): Allows you to switch and select any of the 2 sources* to broadcast to any of the 2 displays*. * Remark: Extra transmitter unit (CE-H23811-S1) and receiver unit (CE-H23911-S1) sold separately Figure 10...
- Page 10 Notice • Wireless signals transmitted through walls, glass, brick or other solid objects will cause signal loss and decrease the transmission distance • It's recommended that the distance between two receivers not less than 3 meters • DO NOT expose the unit to rain, moisture, or liquids •...
-
Page 11: Technical Support And Warranty
This warranty is not transferable and is available only to the original purchaser of the product. SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship. - Page 12 Phone: 510-657-8688 Dual Antenna Wireless Multi-Channel Expandable HDMI Extender is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the CE-H23811-S1 and is the answer not in the manual?
Questions and answers