Advertisement
y IMAGE ADJ
❶
If the SPECIAL menu screen is displayed,
use the Function Setup switch so that the
arrow indicates 'IMAGE ADJ'.
❷
Select a desired mode using the Function
Setup switch.
- GAMMA : The setting range is 0.2 ~ 1.0.
The closer to 1.0 the setting is, the
darker it gets.
→ 0.20, 0.25, 0.30, 0.35, 0.40, 0.45,
0.50, 0.55, 0.60, 0.65, 0.70, 0.75,
0.80, 0.85, 0.90, 0.95, 1.0
- PED LEVEL : The setting range is 1 ~ 100.
The closer to 100 the setting is, the higher the PED level gets.
- COLOR GAIN : The setting range is 1 ~ 100. The smaller the setting value is the smaller the
- H-REV : Flip an image horizontally.
- V-REV : Flip an image vertically.
- D-ZOOM : You can use a digital zoom of x1 ~ x16.
- SHARPNESS : Select a mode to adjust the thickness of an image's sharpness.
Increase or decrease the level of each mode to adjust the level of sharpness.
Depending on the image, adjust it to an appropriate value.
(OFF/LOW/MIDDLE/HIGH)
- PFR : Purple fringe can be reduced.
- RETURN : Return to the SPECIAL menu.
`
When the V-REV or H-REV mode is enabled, the text on the screen does not fl ip.
M
`
If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear.
`
When you use the PFR function, if there is an object near the strong light, the color can be missing.
color gain gets and the more color blind it gets.
IMAGE SETUP
GAMMA
▶
1.
PED LEVEL
2.
----
COLOR GAIN
3.
----
4. H-REV
5. V-REV
6. D-ZOOM
7. SHARPNESS
8. PFR
RETURN
9.
0.45
50
----
50
----
OFF
OFF
OFF
MIDDLE
OFF
English_27
Advertisement
