Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.
overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
Page 4
overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Page 5
Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected.
Page 6
overview Please read the following recommend safety precautions carefully. Do not place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. ...
CONTENTS Important Safety Instructions OVERVIEW Product Features What’s Included At a Glance Installation INSTALLATION & Connecting with other Device CONNECTION Menu Configuration OPERATING YOUR CAMERA Menu Setup Specification APPENDIX Product Overview Troubleshooting English _7...
By adopting high-sensitive colour CMOS, the camera provides clear image quality under a severe low illumination condition of 0.017 Lux (with SENS-UP, x60). • SSNR3 (Samsung Super Noise Reduction) Function The high-performance WN2 DSP chip effectively removes low-light gain noise and afterimage to provide clear images even in dark environments.
WHAT’S INCLUDED Check if the main unit and all the following accessories are included in the product package. Appearance Item Name Quantity Description Camera User Manual Quick Guide Iron Screw Used for fixing to an iron plate Used to test the camera connection to a Cable for the testingmonitor portable display device Dustproof Plate...
Page 10
overview AT A GLANCE Appearance Item Description Top cover Case cover used to protect the lens and the main unit. Camera Case Covers the lens and camera body. Power Port Used to plug the power cable. BLUE(485-) Signal port for RS-485 communication. YELLOW(485+) Signal port for RS-485 communication.
Page 11
Inside Item Description The switch is used for setting and adjusting the camera’s functions and properties. Press and hold this switch more than 2 seconds to display the main menu on the screen. Move this switch left or right to move the cursor or change ◄...
installation & connection installation & connection INSTALLATION Precautions before installation Ensure you read out the following instructions before installing the camera: • Select an installation site (ceiling or wall) that can endure at least 5 times of the camera weight. •...
Page 13
Installation 1. Use the provided screws (x3) to fix the bracket to a desired position (ceiling or wall). Ensure that the <CAMERA FRONT> label on the bracket faces the direction for camera monitoring. 2. Arrange the cables through the bracket to the ceiling or wall.
Page 14
installation & connection Adjusting the monitoring direction for the camera Panning Tilting Cover Front ❖ Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan and adjusting the tilt is called Tilt.
CONNECTING WITH OTHER DEVICE HD-SDI Monitor Motion detection output device Day/Night mode controller Connecting to the monitor Connect the video out port of the camera to the video input port of the monitor. In the initial installation of the camera, you can connect the camera to the monitor for checking the connection status.
installation & connection External Day/Night Switching Input Day/Night mode of the camera can be switched by signal from an external device. To use this function, <DAY/NIGHT> setting of the camera should be set to the <EXTERN>. (Page 27) Motion Detection Signal Out Upon a motion detection, the port outputs signal for an external device for display or operation.
Page 17
Camera Number Transfer Rate Communication Mode Return Data Default 9600 8-NONE-1 Not used When constructing a proprietary controller for direct camera control, apply Pelco-D or Samsung-Techwin protocol. Use only a DVR model that supports HD-SDI saving. English _17...
Operating Your Camera MENU CONFIGURATION MAIN SETUP LENS • DC • BRIGHTNESS • SHUTTER • AGC EXPOSURE • SENS-UP • RETURN • ATW • OUTDOOR • INDOOR WHITE BAL • AWC ➝ SET • MANUAL SSDR • OFF • ON BACKLIGHT •...
MENU SETUP To configure the camera’s function settings, use the button on the rear side of the product. • ▲▼ : Moves up/down in menu. • ◄► : Moves right/left in menu. • SET : Press the switch to set the function in camera menu. To move to a sub-menu item in the menu, press this switch.
Page 20
Operating Your Camera 3. Use the Up/Down buttons to select a desired function. • Move the button right or left to display available values or settings. Set the desired setting value using the button. 4. To finish, select <EXIT> and press the SET button. ...
Page 21
EXPOSURE 1. When the SETUP menu screen is displayed, MAIN SETUP select <EXPOSURE> by using the Function Setup switch so that the arrow indicates 1. LENS ► 2. EXPOSURE <EXPOSURE> . 3. WHITE BAL 4. SSDR 2. Select a desired mode using the Function 5.
Page 22
Operating Your Camera • AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but the greater the noise. - OFF : Not being used - Low : Allows automatic gain control from 5.3dB to 20dB. - Medium : Allows automatic gain control from 5.3dB to 26dB.
Page 23
WHITE BAL (WHITE BALANCE) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, MAIN SETUP select <WHITE BAL>. by using the Function Setup switch so that the arrow indicates 1. LENS 2.
Page 24
Operating Your Camera SSDR (SAMSUNG SUPER DYNAMIC RANGE) SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas.
Page 25
BACKLIGHT This camera is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in backlight, by adopting a function of the proprietary WN2 DSP chip. 1. When the SETUP menu screen is displayed, MAIN SETUP select <BACKLIGHT>...
Page 26
Operating Your Camera SSNR3 This function reduces the background noise in a low luminance environment. 1. When the SETUP menu screen is displayed, MAIN SETUP select <SSNR3> by using the Function Setup switch so that the arrow indicates <SSNR3>. 1. LENS 2.
Page 27
• AUTO : The mode is switched to <COLOR> in AUTO SETUP a normal environment, but switches to <B/W> 1. COLOR B/W ► mode when ambient illumination is low. To set DWELL TIME 5 SEC up the switching time for AUTO mode, press DURATION SLOW the Function Setup switch.
Page 28
Operating Your Camera • CAM TITLE : If you enter a title, the title will CAM TITLE SETUP appear on the monitor. A A B C D E F G H I J K L M 1) If the SPECIAL menu screen is displayed, use N O P Q R S T U V W X Y Z the Function Setup switch so that the arrow a b c d e f g h i j k l m...
Page 29
• IMAGE ADJ : SPECIAL 1) When the SPECIAL menu screen is displayed, 1. CAM TITLE select <IMAGE ADJ> by using the Function ► 2. IMAGE ADJ Setup switch so that the arrow indicates 3. MOTION DET <IMAGE ADJ>. 4. PRIVACY 5.
Page 30
Operating Your Camera • MOTION DET : This product has a feature that MOTION DET allows you to observe movement of objects in ► 1. AREA AREA1 4 different areas on the screen, and the words 2. MODE <MOTION DET> appear on the screen when 3.
Page 31
2) Set up the mode using the Function Setup switch. - PROTOCOL : Select the communication PROTOCOL. (SAMSUNG-T, SAMSUNG-E, Pelco-D, Pelco-P, Bosch, Honeywell, Vicon, Panasonic, GE, AD) - CAM ID : Determines the camera's identification number (between 0 and 255).
TROUBLESHOOTING PROBLEM SOLUTION Check that the power cord and line connection between the camera and monitor are properly connected. When the camera’s HD-SDI BNC output is directly connected to the monitor’s BNC terminal: Make sure the monitor supports HD-SDI signal input. Nothing appears on the screen.
Page 36
Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
Page 40
SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...