Advertisement
setup
y NON DET. AREA : Specify a detection exception area to mask.Select a mask area
` SEL AREA : You can select up to 4 areas.
` MODE : Determines whether to use the area selected in the AREA.
` TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.
` RETURN : Return to the MOTION DET menu.
y INDICATOR : If an object moves in a pattern set by the user, it will be displayed on the
y ALARM OUT : When object movement is detected, the detection signal will be outputted.
` OSD : Display signals on the screen.
` RETURN : Return to the MOTION DET menu.
y RETURN : Return to the VIDEO ANALYTICS menu.
exIT
Select a desired EXIT mode using the Function Setup switch depending on the camera purpose.
y SAVE : Save the current settings and exit the MAIN SETUP menu.
y NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.
y RESET : Revert camera to factory settings. (The language, communication and lens settings
will remain the same).
32_ setup
number and specify the size and position.
screen as a box.
Advertisement
