y DEFOG : You can use the defog mode to allow the camera to automatically detect the fog
density of the screen and display a clear image despite smog, fog or general poor
visibility.
If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow
❶
indicates 'DEFOG'.
❷
Select a desired mode using the Function Setup switch.
- AUTO : Adjust the level automatically.
- Manual : Depending on the defog level set by
the user, adjust the clarity of image.
(LOW, MIDDLE, HIGH)
- OFF : Released state
`
If the defog mode is set to Auto, and if the amount of fog
M
is reduced, the function level will be also reduced. If you want to maintain the same level of defogging, set it to
Manual.
`
If there is little fog and the manual fog level is high, the screen contrast can get high.
y PRIVACY : Mask an area you want to hide on the screen.
❶
If the SPECIAL menu screen is displayed,
use the Function Setup switch so that the
arrow indicates 'PRIVACY'.
❷
Select a desired mode using the Function
Setup switch.
- AREA : You can select up to 24 PRIVACY
areas.
- MODE : Determines whether to use the area
selected in the AREA.
- MASK COLOR : Determine area color. You
- TRANSPARENCY : Adds or removes transparency from the masking area.
can select Green, Red, Blue, Black, White, Gray.
DEFOG MANUAL SETUP
LEVEL
▶
1.
RETURN
2.
PRIVACY AREA SETUP
AREA
▶
1.
MODE
2.
MASK COLOR
3.
TRANSPARENCY
4.
SEL POS
5.
X POS
6.
--------
Y POS
7.
-
-------
RETURN
8.
MIDDLE
AREA
1
OFF
GREEN
OFF
L_TOP
18
33
English_29