Advertisement
troubleshooting
TROUbleSHOOTING
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
Problems
Nothing appears on the screen.
The image on the screen is dim.
The image on the screen is dark.
The camera is not working
properly, and the surface of the
camera is hot.
The DAY/NIGHT menu does not
work.
Color is not correct.
The screen flickers continually.
When coaxial communication is not
available
y Check that the power cord and line connection between the camera
and monitor are properly connected.
y Check that you have properly connected BNC cable to the camera.
y Is lens stained with dirt? Clean your lens with soft, clean cloth.
y Set the monitor or DVR to the proper condition.
y If the camera is exposed to very strong light, change the camera
position.
y Adjust the contrast feature of the monitor or DVR.
y If you have an intermediate device, set the 75Ω / Hi-z properly.
y Check that you have properly connected the camera to an appropriate
power source.
y Check that AGC of EXPOSURE SETUP menu is 'OFF'.
y Check the setting of WHITE BAL SETUP menu
y Ensure the camera is not pointing towards the sun.
y Make sure that the camera and monitor are installed within the
recommended distance.
y Use the video amplifier equivalent to coaxitron if the recommended
installation distance is exceeded.
Troubleshooting
English_33
Advertisement
