Advertisement
setup
Select one of the following 6 modes, as appropriate for your purpose.
※
y ATW : Select this when the color temperature is between 1,800K˚ and 10,500K˚.
y OUTDOOR : Use it in a color temperature range of 1,800K˚ to 10,500K˚.(including Natrium).
y INDOOR : Select this when the color temperature is between 4,500K˚ and 8,500K˚.
Automatically adjusts the camera color for optimization to the indoor environment.
y mANUAl : Select this to fine-tune White Balance
manually. Set White Balance first by using
the ATW or AWC mode. After that button
to MANUAL mode, fine-tune the White
Balance and the Function Setup switch.
y AWC→SeT : To find the optimal luminance level
y Mercury : This is an auto compensation function that optimizes camera colors for the
environments such as mercury lamps.
`
White Balance may not work properly under the following conditions. In this case select the AWC mode.
M
➊ Select this When the color temperature of environment surrounding the subject is out of the control range
(e.g. clear sky, or sunset)
2 When the ambient illumination of the subject is dim.
`
If the camera is directed towards a fluorescent light or is installed in a place where illumination changes
dramatically, the White Balance operation may become unstable.
22_ setup
Auto adjustment is made to optimize the camera color to the outdoor environ-
ment.
for the current environment, point the camera towards a sheet of white paper and
press the Function Setup switch. If the environment changes, readjust it.
WB MANUAL
▶ 1. RED GAIN
2. BLUE GAIN
3. RETURN
--
------ 485
--
------ 535
Advertisement
