Set Up Capture Operation - Pro-face GP2000 Series User Manual

COLOR CONTROL
Changes the amplification of the Chroma signal. When the amplification value of the Chroma
signal (including the colorburst signals) is out of standard range, the standard adjustment fea-
tures may not render optimal images. Changing this setting may result in optimal images.
4.1.3

SET UP CAPTURE OPERATION

This setting screen allows you to set the quality of a captured video image that will be
saved to the GP's CF card as a JPEG file.
To display the setting screen, select the "INITIALIZE", "SETUP I/O 1/2", "SETUP
I/O 2/2", and "SET UP CAPTURE OPERATION" screens. (This menu is displayed
only when the VM Unit is installed.)
• Here describes the operation when using GP/GLC2000 Series. When using GP/
ABS3000 Series units, to display the setup screen, open the [Main Unit Settings] in the
[System Settings Window] in the GP-Pro EX, select [Action Settings] tab and [Screen/
Video Capture Settings] . For details, refer to "GP-Pro EX Reference Manual".
QUALITY (1 - 100)
Enter the desired quality of the captured JPEG file. Reducing this setting's value will
reduce the size of the file, however, it will also reduce the image quality.
When saving a PAL input screen, only "Normal" size or full-screen cap-
ture is possible.
Capure Feature
Video Screen
Caputure
Full-Screen
Caputure
GP2000 Series VM Unit User Manual
Display Size
Normal
1/4 mode
1/16 mode
-
NTSC
OK
OK
OK
OK
PAL
OK
NG
NG
OK
E4-5