Table of Contents
Advertisement
1
Every heater should be inspected before each use, and at least annually by a
qualified service person
2
The appliance must be kept clear and free from combustible materials,
gasoline and other flammable vapors and liquids
3
The flow of ventilation air must not be obstructed.
Be sure to check the fan assembly and ensure the motor and blade
are operating properly and it is important to clean air filters
4
Compressed air may be used to keep components free of dust and dirt
build up.
Pre-Start Checklist
Heater must be level and lockable wheels must be in the lock position
1
Make sure blower switch and both heat switches are in the "OFF" positions
2
Make sure the air intakes are free from any obstruction(s)
3
Make sure the heater oulet is free from any obstruction(s)
4
Make sure the heater is properly grounded
5
Check power supply voltage and ampacity
6
If using the heater outdoors, heater manufacturer approved ducting must be attached to heater.
7
MAINTENANCE
Advertisement
Table of Contents
