Microlife BP A2 Classic Manual page 3

Microlife BP A2 Classic
1 ON/OFF button
2 Display
3 Cuff Socket
4 Mains Adapter Socket
5 Battery Compartment
6 Cuff
7 Cuff Connector
8 M-button (memory)
Display
9 Systolic Value
AT Diastolic Value
AK Pulse Rate
AL Heart Arrhythmia Indicator
AM Pulse
AN Battery Display
AO Stored Value
AP Traffic Light Indicator
Read the instructions for use
Type BF applied part
Class II equipment
Batteries and electronic devices must be disposed of in
accordance with the locally applicable regulations, not with
domestic waste.
Keep dry
Temperature limitation
Serial number
SN N
Reference number
BP A2 Classic
Manufacturer
Date of manufacture
Protection against solid foreign objects and harmful effects
IP20
due to the ingress of water
A mark of compliance with technical regulations
CE Marking of Conformity
Intended use:
This oscillometric blood pressure monitor is intended for measuring
non-invasive blood pressure in people aged 12 years or older.
It is clinically validated in patients with hypertension, hypotension,
diabetes, pregnancy, pre-eclampsia, atherosclerosis, end-stage
renal disease, obesity and the elderly.
Dear Customer,
This device was developed in collaboration with physicians and
clinical tests carried out prove its measurement accuracy to be of
a very high standard.*
If you have any questions, problems or want to order spare parts
please contact your local Microlife-Customer Service. Your dealer
or pharmacy will be able to give you the address of the Microlife
dealer in your country. Alternatively, visit the internet at
www.microlife.com where you will find a wealth of invaluable infor-
mation on our products.
Stay healthy – Microlife AG!
* This device uses the same measuring technology as the award
winning «BP 3BTO-A» model tested according to the British and
Irish Hypertension Society (BIHS) protocol.
EN
EN
1