Table of Contents
Advertisement
4. INSTALLATION
PCE-ND10 Meter is adapted to be mounted to the panel
with mounting brackets (see fig. 1). Meter housing is made
of plastic.
Housing dimensions: 96 x 96 x 77 mm. On the outer side of the
meter there are screw and tab terminal strips that can be used
2
for connecting external wires with diameter up to 2.5 mm
.
+0.6
+0.6
Prior to installation a 92.5
x 92.5
mm slot must be made
in the panel. The thickness of the panel material should not
exceed 15 mm. The meter must be placed in the panel from
the front. During installation the powering voltage must be
off. When the panel is inserted in the slot, mount it in place
with provided mounting brackets.
Fig. 1. Meter fitting.
7
Advertisement
Table of Contents
