Table of Contents
Related Manuals for PCE Health and Fitness PCE-T 1200
Summary of Contents for PCE Health and Fitness PCE-T 1200
- Page 1 12- Channel Temperature Recorder PCE-T 1200 MANUAL Version 1.0 18.02.2016 Address:East Room 306,3th Floor,1st Building,Shenhua Industrial Park,Meihua Road, Futian District,Shenzhen City Tel:0755-32978297 Email:hj@pce-instruments.cn...
-
Page 2: Table Of Contents
Manual Table Of Contents Introduction..........................Specifications......................... Electrical Specifications (23 ± 5 °C)................... Detailed description and keys of PCE-T 1200..............Measuring Procedure......................Type K measurement..........................Type J / T / E / R / S measurements......................5.3 Data Hold function............................5.4 Max. / Min. function............................. - Page 3 Manual Safety Precautions Please read the following instruction manual before operating with the device. Damages caused by disregard of the instructions written in this manual, are excluded from any warranty or liability Safety measures This device is only designed for the applications mentioned in this manual. In case the device is used for any other application than these, it might lead to hazardous situations.
-
Page 4: Introduction
Manual 1. Introduction The 12-channel temperature recorder PCE-T 1200 features a 2 GB SD memory card (SD memory cards can have a maximum capacity of 16 GB). The optional software allows a direct read-out of the SD memory card via its USB interface, and thus facilitates evaluating the recorded data. It is standard that the measured data can be imported into an Excel file without further ado or any software. -
Page 5: Electrical Specifications (23 ± 5 °C)
Manual - Data transfer: RS 232 / USB cable - Switch-off function: Automatic switch-off to maintain longer battery lifetime (adjustable) - Operation temperature: 0 … 50 °C - Air humidity: Max. 85 % RH - Power Supply: 8 x 1.5 V AA batteries or 9 V adapter - Weight: 827 g - Dimensions:... -
Page 6: Detailed Description And Keys Of Pce-T 1200
Manual 4. Detailed description and keys of PCE-T 1200 1. Display 2. Power 3. Hold (or Next) 4. REC (or Enter) 5. Type (or ▲ key) 6. Page (or ▼ key) 7. Logger key 8. SET key T1 … T12 connections 10. -
Page 7: Measuring Procedure
Manual 5. Measuring Procedure Type K measurement 1. Start device by pressing “POWER” key 2. The standard thermal element of this device is the type K. Thus the display will indicate “K”. The standard temperature unit is °C. How to switch to F or back, is described under 8.6 3. -
Page 8: Data Logging
Manual 6. Data logging Preparation a. Insert SD memory card: Insert the SD memory card into the card holder. Please consider inserting in the right direction. Avoid pushing with too much pressure. The SD memory card should latch in without applying much force. b. -
Page 9: Data Information
Manual Data information During the standard measurement mode (without data logger function) you can check the recording interval via the “sampling check” button. The display will then show the set recording interval at the bottom. SD memory card a. If you insert the SD memory card into the device for the first time, the device will generate automatically a folder on the memory card: TMB01 b. -
Page 10: Further Specifications
Manual 8. Further specifications You can access the menu for all settings on the device by pressing the “SET” button for more than 2 seconds, whilst the Data logger function of the device is switched off. By pressing the “NEXT” button you can then scroll through the various options. -
Page 11: Decimal Point
Manual Decimal point The decimal point can be formatted as “point” or “comma”, since the standard for the decimal point varies between the two symbols. While in many parts of the world, the decimal point is a point (e.g. 45.34), in Europe it is often a comma (e.g. 45,34). Thus the display indicates “USA” for setting a “point”... -
Page 12: Change Batteries
Manual 10. Change batteries If a battery symbol appears at the left corner of the display, you should change the batteries (see point 14 “Disposal”). 1. Loosen the screws of the battery compartment at the backside of the device. 2. Remove the old batteries and put in 8 new AA batteries. Consider the poling of the batteries, if you do so. -
Page 13: Patents
Manual Decimal point, from right to left 0 = no DP, 1 = DP, 2 = 2 DP, 3 = 3 DP D8 … D1 Display, D1 = LSD, D8 = MSD End word 13. Patents The device has the following patents, or there is a patent submitted in the following countries: Germany Nr.