Replacing The System Outer Foil And The Inner Blades; Replacing The Cleaning Liquid - Panasonic ES‑LV9E Operating Instructions Manual

Replacing the system outer foil and
the inner blades
appears on the lamp display once a year. (Based on
one 3‑minute shave use per day)
We recommend checking the system outer foil and the
inner blades when it appears.
Press the power switch for more than 30 seconds to
turn off .
Even if is not turned off right after the replacement, it
will automatically turn off within approximately 7 uses.
system outer foil
inner blades
►Removing the outer foil section
Press the foil frame release buttons and lift
the outer foil section upwards.
►Attaching the outer foil section
After turning the foil frame mark (
front, securely attach the outer foil section
to the shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release
buttons and pull down the system
outer foil.
20
once every year
once every two years
) to the
• Do not press the system outer foil release buttons
with excessive force.
Doing so may bend the system outer foil, preventing
complete attachment to the foil frame.
2. Align the foil frame mark (
mark ( ) and securely attach together until it clicks.
►Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
Note
Do not throw away the foil frame.

Replacing the cleaning liquid

If the STATUS lamp glows for 5 seconds when the
SELECT button is pressed, the cleaning liquid needs to
be replaced.
• Even if the STATUS lamp does not light up, replace
the cleaning liquid after 6 months have passed.
1
Remove the AC adaptor and
remove the cleaning liquid unit�
(See page 13�)
2
Wash away the old cleaning liquid�
• It can be drained as sewage.
) and the system outer foil
1