Using Pure Ip In The Netware 5/5.1 Or 6/6.5 Environment - Gestetner C7528 Software Manual

Using a Printer Server
❒ If the printer works as configured, the name of the print server appears as
a connected user.
❒ If you cannot identify the printer you want to configure, check the printer
name with the configuration page printed from the printer. For details about
printing a configuration page, see
❒ If no printer names appear in the list, match the frame types of IPX/SPXs
for the computer and printer. Use the [Network] dialog box of Windows to
change the frame type of the computer.
For details about changing the printer's frame type ("NW Frame Type"),
see "Configuring the Printer", Setup Guide.
When using the printer in a pure IP environment of NetWare 5/5.1 or Net-
Ware 6.0/6.5, see
vironment".

Using Pure IP in the NetWare 5/5.1 or 6/6.5 Environment

Follow the procedure below to connect the printer as a print server in a pure IP
environment of NetWare 5/5.1.
❒ When creating a queued print server in a pure IP environment of NetWare
5/5.1 or NetWare 6.0, create a print queue on the file server using NetWare
Administrator.
❒ This printer is not available as a remote printer for use in a pure IP environ-
ment.
❒ To use the printer in a pure IP environment, set it to TCP/IP.
Setting up using NIB Setup Tool
A
Log on to the file server as an administrator or administrator equivalent.
B
Start NIB Setup Tool on the [Start] menu.
C
Click [Property Sheet], and then click [OK].
D
Select the printer you want to configure, and then click [Finish].
A dialog box prompting you to perform the remaining configuration tasks in the
Web browser appears. Click [OK], and then wait until Web Image Monitor
starts automatically.
E
A dialog box for entering the user name and password appears.
Enter the user name and password, and then click OK.
p.161 "Printing a Configuration
p.275 "Using Pure IP in the NetWare 5/5.1 or 6/6.5 En-
Page".
275