Snmp - Gestetner C7528 Software Manual

Monitoring and Configuring the Printer
• Set computer name using up to 15 characters. Names beginning with
"RNP" or "rnp" cannot be entered.
❖ Working Group Name settings
msh> smb group
• Set workgroup name using up to 15 characters
❖ Comment settings
msh> smb comment
• Set comment using up to 31 characters
❖ Notify print job completion
msh> smb notif {on | off}
• To notify print job completion, specify "on". Otherwise, specify "off"
❖ Deleting Computer Name
msh> smb clear comp
❖ Deleting Group Name
msh> smb clear group
❖ Deleting Comment
msh> smb clear comment
❖ Protocol settings
msh> smb protocol [tcpip {up | down}]
• Enable or disable TCP/IP. Specify "up" to enable, and "down" to disable.
❖ Display
msh> smb protocol

snmp

Use the "snmp" command to display and edit SNMP configuration settings such
as the community name.
❖ View settings
msh> snmp
• Default access settings 1 is as follows:
Community name:public
IP address:0.0.0.0
Access type:read-only / trap off
• Default access settings 2 is as follows:
Community name:admin
236