Set - Gestetner C7528 Software Manual

Monitoring and Configuring the Printer
❖ Route Flush
msh> route flush
❒ The maximum number of routing tables is 16.
❒ Set a gateway address when communicating with devices on an external net-
work.
❒ The same gateway address is shared by all interfaces.

set

Use the "set" command to set the protocol information display "active" or "inac-
tive".
❖ View settings
The following command displays protocol information (active/inactive).
msh> set tcpip
msh> set appletalk
msh> set netware
msh> set smb
msh> set scsiprint
• scsiprint is available when the optional IEEE 1394 interface board is in-
stalled.
msh> set ip1394
• ip1394 can be specified only when the IEEE 1394 interface is installed.
msh> set pictbridge
• pictbridge can be specified only when the pictbridge is installed.
msh> set protocol
• When protocol is specified, information about TCP/IP, AppleTalk, Netware,
and SMB appears.
msh> set lpr
msh> set ftp
msh> set rsh
msh> set diprint
msh> set web
msh> set snmp
msh> set ssl
msh> set nrs
msh> set rfu
msh> set ipp
233