Passwd - Gestetner C7528 Software Manual

Monitoring and Configuring the Printer
❖ Setting login mode for file server
msh> netware login server
❖ Setting login mode for NDS tree
msh> netware login tree
❖ Setting login mode for NDS tree name
msh> netware tree "NDS name"
❖ Displaying the current file transfer protocol
msh> netware trans
Setting
TCP/IP + IPX (TCP/IP priority)
TCP/IP + IPX (IPX priority)
TCP/IP
IPX
❖ Specifying the file transfer protocol
msh> netware trans tcppri
• The above command specifies TCP/IP and IPX(TCP/IP priority) as the file
transfer protocol.
msh> netware trans ipxpri
• The above command specifies TCP/IP and IPX (IPX priority) as the file
transfer protocol.
msh> netware trans tcp
• The above command specifies TCP/IP as the file transfer protocol.
msh> netware trans ipx
• The above command specifies IPX as the file transfer protocol.

passwd

Use the "passwd" command to change the remote maintenance password.
❖ Changing the Password
msh> passwd
• Enter the current password.
• Enter the new password.
• Enter the new password once again.
Display
"TCP/IP + IPX(TCP/IP priority)"
"TCP/IP + IPX(IPX priority)"
"TCP/IP"
"IPX"
229