Info; Ipp - Gestetner C7528 Software Manual

Monitoring and Configuring the Printer

info

Use the "info" command to display printer information such as paper tray, output
tray, and printer language.
❖ Printer information display
msh> info
For details about displayed contents, see
over the Network".

ipp

Use the "ipp" command to configure IPP settings.
❖ Viewing settings
The following command displays the current IPP settings:
msh> ipp
Example output:
timeout=900(sec)
auth basic
• The "timeout" setting specifies how many seconds the computer tries to
send print jobs when no connection can be made to the network printer.
• The "auth" setting indicates the user authorization mode.
❖ IPP timeout configuration
Specify how many seconds the computer waits before canceling an interrupt-
ed print job. The time can be entered between 30 to 65535 seconds.
msh> ipp timeout [30 - 65535]
❖ IPP user authorization configuration
Use IPP user authorization to restrict users to print with IPP. The default is
"off".
msh> ipp auth {basic|digest|off}
• User authorization settings are "basic" and "digest".
• Use "off" to remove a user's authorization.
• If user authorization is specified, register a user name. You can register up
to 10 users.
❖ IPP user configuration
Use the following command:
msh> ipp user
The following message appears:
p.248 "Getting Printer Information
227