Checking The Error Log - Gestetner C7528 Software Manual

Other Print Operations
Deleting all files
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Hold Print], and then press the {# En-
ter} key.
C
Press the {U} or {T} key to display [Del. All Files], and then press the {#
Enter} key.
The user ID and the time when the job was stored appear.
D
Press the {U} or {T} key to confirm deleting all files, and then press the
{# Enter} key.
To cancel deleting a Hold Print file, press the {Escape} key.
E
Press the {# Enter} key.
F
Press the {Online} key.
The initial screen appears.

Checking the Error Log

When a print job is not saved on the hard disk, it remains in the error log and can
be checked using the control panel.
❒ The latest 30 error files are stored in the error log. If a new error file is added
when there are 30 error files already stored, the oldest file is deleted. Howev-
er, if the oldest error file is a sample print file, it is not deleted, but stored in-
stead in the sample print error log until the number of sample print error files
reaches 30.
❒ If you turn off the power, the logs will be deleted.
120