Sprint; Ssdp; Status; Syslog - Gestetner C7528 Software Manual

Monitoring and Configuring the Printer

sprint

Use the "sprint" command to make settings for IEEE 1394 (SCSI print).
❖ View settings
IEEE 1394 (SCSI print) settings are displayed.
msh> sprint
❖ Bidirectional configuration for IEEE 1394 (SCSI print)
Use this setting to set IEEE 1394 (SCSI print) bidirectional.
The default is "on".
msh> sprint bidi {on | off}

ssdp

Use the "ssdp" command to view and configue ssdp parameters.
❖ View settings
msh> ssdp
❖ Setting the effective time
msh> ssdp profile [1801 | 86400]
The default is 10800 seconds.
❖ Setting the advertise packet TTL
msh> ssdp ttl [1 | 225]
The default is 4.

status

The printer status can be checked using the following command:
❖ Messages
msh> status
For details, see p.248 "Current Printer

syslog

Use the "syslog" command to display the information stored in the printer's sys-
tem log.
Status".
241