Em Display Settings - PCE Health and Fitness PCE-MCA 50 User Manual

4.4.1 EM Display Settings

This Page is appears in
Parameter
Description / Options
Name
Main Display Select which Reading to be display as a Main Reading (Reading Displays in
Box in RUN Page).
Available Options:
Filter(sec) 1
Filter is useful when a measurement signal contains unwanted noise.
Range:
0.0 to 60.0 sec
Tare(unit)
The Tare value is subtracted from the reading of the measured value.
Here unit is changed according to current Input Type and Measure Display
Mode.
Range:
In accordance with Input Range & Measure Display Mode.
Note: Beware of the problems that may result in not seeing the true
measurement value.
Actual Display the Actual Input Value
Percentage Display the Percentage Value of the Input.
The Value depends on Input Range. These settings are
available from MENU →EM SETUP.
Scaled Display the Scaled Value of the Input.
The Scale Value depends on Input Range, Input Scaled
Range & Transfer Function. These settings are available
from MENU →EM SETUP.
Order IIR Low Pass Filter for Input Reading.
st
RUN MENU DISPLAY
→ →
EM Terminal.
→