Table of Contents
Advertisement
5.3
Display
1. Settings
2. Probe type
3. Measurement information
4. Material information
5. Measurement results
6. Single measurements of the test series
7. Measurement result
Settings
The following settings are displayed:
-
Auto-save (on/off)
-
Sound (on/off)
-
Time
-
Battery condition
Probe type
The instrument gives information on the assembled probe and its' testing force. The standard probe type
has got a preset testing force of 20 N.
Measurement information
Here you can see how many measurements have to be made in the current test series. In addition to that
you can see in which slot the measured data has been stored.
Material information
Here you can see which material / calibration profile is in use.
Measurement results
All measured data of the test series are displayed here. It is the average of all made measurements of the
test series.
Single measurements of the test series
Here you can see how many single measurements have been made and what the values of the single
measurements are.
Measurement result
Here the current measurement result is displayed. You can see the MAX/MIN value as well as the mean
value of two other hardness scales.
Manual
7
6
4
2
9
1
2
3
5
Advertisement
Table of Contents
