Contents Safety notes ................... 1 Specifications ..................2 Delivery scope ..................2 System description ................3 Front and back ......................... 3 Top and bottom ........................ 4 Operation ....................4 Preparation ........................4 Set flash frequency ......................5 Rotational speed measurement ..................5 External input ........................
Safety notes Please read this manual carefully and completely before you use the device for the first time. The device may only be used by qualified personnel and repaired by PCE Instruments personnel. Damage or injuries caused by non-observance of the manual are excluded from our liability and not covered by our warranty.
Colour temperature 6500 K Flash output 8 joules Beam angle 80 ° PCE-DSX 20: 230 V AC 50/60 Hz Power supply PCE-DSX 20-US: 110 V AC 50/60 Hz Power consumption 240 mA @ 3600 FPM Operating conditions 0 ... 50 °C / 32 ... 122 °F; max. 80 % RH Dimensions 230 x 110 x 150 mm / 9 x 4.3 x 5.9“...
System description Front and back ① ⑦ Screws protective glass Ext. trigger input / signal output ② ⑧ Xenon flash lamp 230 V AC input ③ ⑨ Internal / external selection key MODE key ④ ⑩ Key X 2 (doubling) Key + ⑤...
Top and bottom ① ⑥ Handle HZ mode LED ② ⑦ Display Internal mode LED ③ ⑧ RPM mode LED External mode LED ④ ⑨ DEG mode LED Trigger mode LED ⑤ ⑩ mSec mode LED Tripod thread Operation Preparation •...
Set flash frequency 5.2.1 Quick adjustment Use the X 2 and ÷2 keys to quickly change the flash frequency. "X 2" doubles the currently set flash frequency. Example based on flash frequency 100/min: 100 → X 2 → 200 → X 2 → 400 "÷2 "...
External input • Connect an external signal cable to the signal input on the rear side. (connector plug is included in the delivery scope) • Switch on the stroboscope via the switch on the back. • Use the "Int / Ext Signal" key to select the External option. •...
5.4.2.1 Application example You want to view a rotating object with external triggering. The viewing area or the mark of the rotating object is outside or not perfectly within your field of view. With the phase shift / delay of the flash triggering, you can let the field of view / the marking move optically around the axis of rotation to the ideal position.
Warranty You can read our warranty terms in our General Business Terms which you can find here: https://www.pce-instruments.com/english/terms. Disposal For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament applies. Due to the contained pollutants, batteries must not be disposed of as household waste. They must be given to collection points designed for that purpose.
Page 11
PCE Instruments contact information Germany France Spain PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L. Im Langel 26 23, rue de Strasbourg Calle Mayor, 53 D-59872 Meschede 67250 Soultz-Sous-Forets 02500 Tobarra (Albacete) Deutschland France España Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17 Tel.