Copying From The Bypass Tray - Gestetner DSm651 Copy Reference Manual

Copying

Copying from the Bypass Tray

Use the bypass tray to copy onto spe-
cial paper such as OHP transparen-
cies, thick paper, thin paper, and copy
paper that cannot be loaded in the pa-
per trays.
2
Preparation
When copying from the bypass
tray, select [1 Sided→ → → → 1 Sided] for
copying in [Dup./Combine/Series].
You can change the initial settings.
See p.125 "Duplex Mode Priority".
Important
❒ Paper larger than 433 mm, 17.1" in
length is likely to jam, crease, or
not feed in properly.
❒ When copying onto special paper
such as adhesive labels, always se-
lect "Face up". If you select "Face
Down", a paper misfeed may oc-
cur. See p.136 "Eject Copy Face
Up/Down in Bypass Mode".
Note
❒ The sizes that you can use in the
bypass tray are as follows:
Metric
version
Inch
version
❒ The machine can automatically de-
tect the following sizes as standard
size copy paper:
Metric
version
Inch
version
❒ When copying on sizes other than
those specified above, you need to
input its vertical and horizontal di-
mensions. See p.25 "When copying
onto custom size paper".
24
• Vertical: 100 – 305 mm
• Horizontal: 139.7 – 600 mm
• Vertical: 3.9" – 12.0"
• Horizontal: 5.5" – 23.6"
A3L, A4L, A5L, B4 JISL,
B5 JISL, B6 JISL
11" × 17"L, 8 " × 11"L,
1
/
2
" × 8
1 1
5 / / "L
2 2
❒ When copying onto OHP transpar-
encies or paper heavier than 105
2
g/m (about 27.9 lb.), you need to
specify the paper type. See "Paper
Type" of "User Tools", General Set-
tings Guide.
❒ If you place originals on the expo-
sure glass and want the copies to
be delivered face down, select
"Face down" for both "Eject Copy
Face Up/Down in Glass Mode"
and "Eject Copy Face Up/Down in
Bypass Mode" of User Tools. For
details, see General Settings Guide.
❒ If you have selected OHP transpar-
encies or thick paper in "Special
paper", you cannot have the copies
delivered face down.
❒ If you use paper larger than 433
mm, 17.1" in size, you cannot have
the copies delivered face down.
❒ The maximum number of sheets
that you can load onto the bypass
tray depends on paper type. The
number should not exceed the up-
per limit.
A A A A
Open the bypass tray.