Gestetner DSm651 Copy Reference Manual page 54

Copying
Z-fold positions
Right
fold
2
Bottom
fold
*1
The above table shows Z-folding positions. The orientation of the paper does not in-
dicate direction of delivery.
Using the Z-fold Support Tray
When using the Z-fold function to-
gether with the Sort, Stack or Staple
functions, set the Z-fold support tray
as follows.
A A A A
Open the front cover of the book-
let finisher and take out the Z-
fold support tray.
44
Direction in which Original is Set
Exposure glass ADF
B B B B
Fit the hooks of the support tray
into the two holes on finisher
shift tray 2.
Note
❒ When not using the Z-fold sup-
port tray, keep it in its designat-
ed position on the inside of the
front cover of the finisher.
ACC027S
❒ Do not leave the support tray on
finisher shift tray 2 if you are
not Z-folding prints. Otherwise
the prints will not be properly
aligned.
*1
Direction of fold
ACC025S