Copying From The Bypass Tray - Gestetner 3355 User Manual

Gestetner 3355: user guide
Table of Contents

Advertisement

Copying from the Bypass Tray

Use the bypass tray to copy onto OHP transparencies, adhesive labels, translu-
cent paper, postcards, and copy paper that cannot be set in the paper tray.
Limitation
When copying several originals using the bypass tray, copies are delivered
face up ("Face Up Exit") and in reverse order by default.
You can change the setting to "Face Down Exit" only when you are using
high quality copy paper with a weight of 52 – 105g/m
"Face-Up/Down Selection in Bypass Mode" in
If you have copies delivered face down when copying onto special paper,
such as adhesive labels, a paper misfeed may occur. Be sure to select "Face Up
Exit".
Note
If you wish to have copies delivered face down when only one original is set
on the exposure glass or in the document feeder, you must set the "Face-Up/
Down Selection in Bypass Mode" setting to "Face Down Exit" and the "Face-
Up/Down Selection in Platen Mode" setting to "Face Down Exit" with the
User Tools. See "Face-Up/Down Selection in Bypass Mode" in
"Count Manager" and "Face-Up/Down Selection in Platen Mode" in
"Input/Output".
The machine can automatically detect the following sizes as standard size
copy paper:
Metric version
Inch version
If you do not use the standard size copy paper, you should input vertical and
horizontal dimensions. The sizes that you can input are as follows:
Metric version
Inch version
To make copies onto OHP transparencies or thick paper exceeding 105g/m
28 lb. Bond, specify the paper type in
parencies or Thick Paper".
The maximum number of sheets you can set at a time depends on the paper
type. For details about paper capacity of the bypass tray, see
per".
A3L, A4L, A5L
1
A3L, 11" 17"L, 8
/
1
1
10"K, 5
/
"
8
/
"L
2
2
• Vertical: 100 – 300mm
• Horizontal: 140 – 432mm
• Vertical: 4.0" – 11.7"
• Horizontal: 5.6" – 17.0"
Copying from the Bypass Tray
2
(14 – 28 lb. Bond). See
P.331 "Count Manager".
1
" 14"L, 8
/
" 11"L, 8" 10
2
2
P.76 "When Copying onto OHP Trans-
P.331
P.329
1
/
"K, 8"
2
2
,
P.23 "Copy Pa-
73
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

3370

Table of Contents