Gestetner DSm651 Copy Reference Manual page 161

• Even if the direction of originals is different from that of the copy paper,
the machine will automatically rotate the image by 90°to make copies
properly.
• If you mix originals of different sizes or place originals in different orien-
tations, you cannot use this function.
• Four originals are copied onto each sheet of copy paper with this function.
If the number of originals scanned is less than a multiple of 4, the last page
will be blank.
• Copying to make a magazine may take some time after scanning originals.
• If the Booklet Finisher is installed and you select "Magazine" and "Staple
(Saddle Stitch)", copies are stacked, stapled at the center, folded in half au-
tomatically, and then delivered.
• Depending on the paper type, the folding position may very slightly.
❖ ❖ ❖ ❖ Repeat
Depending on the paper size, ratio, and orientation, parts of repeated images
may not be copied.
If you use this function with "Custom Size Original", you can copy repeatedly
the image in the area you want by specifying the vertical and horizontal
lengths from the base point. In this case, place your original on the exposure
glass.
1.
Base point
2.
Horizontal length
3.
Vertical length
❖ ❖ ❖ ❖ Centering
Though the original is set to a different orientation from the paper loaded, the
machine will not rotate the image by 90° (Rotate copy).
❖ ❖ ❖ ❖ Erase
The width of the erased margin varies depending on the reproduction ratio.
If the size of the original is different from sizes listed in the following chart,
the erased margin might be shifted:
Supplementary Specifications
6
151